Soft menu buttons (1-3), Redmote control modes, Redmote setup – RED DSMC User Manual

Page 142: Setup system, Navigation group, Power/key lock switch, Red dsmc operation guide

RED DSMC OPERATION GUIDE

955-0020_V5.3, REV-J | 142

SOFT MENU BUTTONS (1-3)

There are three (3) Primary Soft Menu Buttons located below the left side of the REDMOTE LCD. These buttons

provide quick access to REDMOTE advanced operations.

Button 1: Access Connect Menu.

Button 2: Toggle between Local and Remote Modes.

Button 3: Access Setup Menu.

REDMOTE CONTROL MODES

Press Button 2 to toggle between Remote Mode and Local Mode. The current mode displays on the REDMOTE

LCD, directly above the Primary Soft Menu Buttons. Use the Scroll Wheel and Directional Keys to navigate with

the cursor. For more information, go to

Local Mode: Navigate menus using the REDMOTE controls and display.

Remote Mode: Navigate menus with REDMOTE controls, using an attached LCD, EVF, or other monitor as a

reference.

NOTE: When in Remote Mode, the current menu item does not display on the REDMOTE.

REDMOTE SETUP

The Setup Menu includes:

Turn Wireless On/Off: Toggles the REDLINK wireless link on/off.

Setup System: Provides access to REDMOTE settings.

Setup Slot: Program the menu slots on the REDMOTE LCD.

SETUP SYSTEM

The Setup System Menu allows you to change REDMOTE settings and shows the MAC address and REDMOTE

firmware version.
The following adjustable settings are available:

Brightness: LCD backlight intensity. Set the value to maximum for daylight visibility, or reduce it for standard

operation and prolonged battery life. Default is Maximum.

Volume: Volume of the REDMOTE speaker. Default is Minimum.

Auto Shutdown: Amount of inactivity time before the REDMOTE turns off automatically. Default is off.

NAVIGATION GROUP

Use the Navigation Group to navigate the DSMC menus and change settings.

Scroll Wheel: Select and adjust the value of a selected setting.

Directional Keys (D-Pad): Navigate menus.

ENTER: Press ENTER to confirm a setting or access the selected menu.

POWER/KEY LOCK SWITCH

Turn on: Press and hold the switch in the down position for two (2) seconds.

Turn off: Press and hold the switch in the down position for five (5) seconds. Or, press the switch down into

the down position and release to access the Shutdown menu.

Lock keys: Move the switch to the up position to prevent unintentional operation. “KEYS LOCKED” display

above the Primary Soft Menu Buttons when lock is enabled.