Displays and electronic viewfinders, Red displays, Touchscreen precautions – RED DSMC User Manual

Page 25: Red dsmc operation guide

RED DSMC OPERATION GUIDE

955-0020_V5.3, REV-J | 25

DISPLAYS AND ELECTRONIC VIEWFINDERS

This section describes the RED displays and electronic viewfinders (EVFs).
RED offers the following displays and EVFs:

ITEM

PART NUMBER

RED Touch 5.0" LCD (800 x 400 resolution)

730-0008

RED Touch 7.0" LCD

(1920 x 1136 resolution)

730-0007

RED Touch 9.0" LCD (1280 x 784 resolution)

730-0011

RED PRO LCD 7" (1024 x 600 resolution)

730-0009

BOMB EVF

(LCOS)

730-0004

BOMB EVF (OLED)

730-0010

1. The RED Touch 7.0" LCD requires that your DSMC is on firmware v5.2.38 or later.

For a full list of LCD and EVF user keys and default actions, go to

“Default Key Functions” on page 205

RED DISPLAYS

RED displays provide important camera parameters on the graphical user interface (GUI) and offer a variety of

monitor viewing options. RED touchscreen displays enable you to use gestures to navigate menus and adjust

camera parameters. RED displays feature 8-bit RGB, 4:4:4 progressive scan, providing up to 16.7 million colors

and up to 70% NTSC color gamut.

TOUCHSCREEN PRECAUTIONS

WARNING: DO NOT use the threaded holes to mount to the BRAIN. Damage to a RED display or other components

of the DSMC system caused by using these threads are not covered under warranty.
WARNING: DO NOT use a RED display as a handle to lift or carry the DSMC. Damage to a RED display or other

components of the DSMC system caused by using the display as a handle are not covered under warranty.
IMPORTANT: The RED LCD swivel axis has a total adjustment range of approximately 360˚ (180˚ clockwise or

counterclockwise from the nominal “rear-facing” orientation). The tilt axis range of adjustment is approximately

180˚. Damage to a RED display or other DSMC components caused by excessive force is not covered under

warranty.

RED Touch 7.0" LCD