Rack focus, Set up rack focus, Red dsmc operation guide – RED DSMC User Manual

Page 125

RED DSMC OPERATION GUIDE

955-0020_V5.3, REV-J | 125

8. Close the Focus menu.

The target displays on the touchscreen, and the monitor that you selected for the Enhanced A/F feature is

in Clean mode.

RACK FOCUS

Use the Rack tab to configure up to four (4) focus points and execute rack focus between them.

SET UP RACK FOCUS

1. Ensure that a DSMC Nikon Mount, DSMC Canon Mount, or DSMC Canon MOTION MOUNT is installed and

that a supported lens is attached to the BRAIN.

2. Go to Menu > Focus > Mode.
3. Select Rack from the Mode drop-down menu.

Spot is automatically selected from the Zone drop-down menu, since rack focus only works with Spot zone.