Juniper Systems Allegro DOS Manual - Manual (Page 80)

80 Allegro DOS Owner’s Manual
System Setup Program
The Setup program is used to confi gure your Allegro DOS Field PC.
The parameters you edit with Setup include:
System Date and Time
Processing Speed
Keyboard Confi guration
Display Confi guration
Auto-Panning (On or Off)
Power Management
Executing Setup
The easiest way to invoke the Setup program is by pressing the
GOLD key plus the S from any screen in DOS. The main menu
screen pops up.
Setup is resident on the system ROM (A:) and can be executed from
FileScout or directly from DOS. You can also execute Setup during
the POST (Power On Self Test) by pressing the Del key before DOS
boots up.
Executing Setup from FileScout
From the FileScout main menu, press the F10. The Utility menu
appears. Press 3 to select Setup. The Setup main menu screen is
displayed.
Executing Setup from DOS
To run the Setup program from DOS, type:
Setup ENTER
The Setup main menu screen is displayed.
If you receive an error message after issuing this command, check
to ensure that drive A: is referenced in your path statement in the
AUTOEXEC.BAT fi le. If it is not referenced, type A:Setup at the DOS
prompt.
Setup Program Screens
Main Menu Screen
When you execute Setup, the main menu screen is displayed. Five
System Setup screen options are listed. Use the up or down arrow
keys to highlight the screen you want to view and press ENTER.
▲
▲