Juniper Systems Allegro DOS Manual - Manual (Page 114)

114 Allegro DOS Owner’s Manual
PC Card Utilities and Drivers
Factory Installed Programs and Drivers
In DOS, the PC card slot is operated by CardSoft ™ PC card utility
programs and device drivers from System Soft ™ . They are factory
installed on the C: drive of the Allegro and are also located on the
Allegro Distribution CD-ROM.
These programs and drivers are listed below (for the proper loading
order, see the sample CONFIG.SYS fi le in Chapter 4).
❖ Note: All of the “.CLB” are descriptor fi les that gives the PC Card device
drivers the information they need to correctly use the associated card type
and brand.
Name Type Description
ATADRV EXE Device driver for ATA Flash cards and hard
drives.
CARDID EXE Device driver to determine the type/brand of
card in the system.
CARDID INI Information fi le that contains a list of all of the
card types and brands that the cardid program
can identify.
CARDINFO EXE Utility program that can tell you about the
card that is currently plugged into the
Allegro. CARDINFO /V gives additional
information.
CS EXE The card services device driver.
CSALLOC EXE Device driver to allocate the needed memory.
CSALLOC INI Information fi les for the CSALLOC program.
MTDDRV EXE Memory Technology device driver.
MTSRAM EXE Device driver for SRAM type cards.
SS365SL EXE Socket service device driver.
CBDAS CLB
DLINK CLB DLINK brand network cards
GENATA CLB Generic ATA Flash and hard drive cards
GENMODEM CLB Generic modem card
▲