beautypg.com

Bios messages, Power on self test – Juniper Systems Allegro DOS Manual User Manual

Page 110

background image

110 Allegro DOS Owner’s Manual

BIOS Messages

Power On Self Test

When the Allegro powers up, it goes through a series of internal
tests and diagnostics. This is called the Power On Self Test (POST).
During these tests, messages are displayed on the screen or a
series of beeps are heard. If you see an error message during this
process, try resetting the Allegro by holding the On/Off key down
for 8 seconds. If the error persists, contact our Customer Service
Department.