Juniper Systems Allegro DOS Manual - Manual (Page 57)

Allegro DOS Owner’s Manual 57
MS-DOS Operating System Overview
This Chapter describes the operation of the Allegro using the
MS-DOS
™ 6.22 operating system.
Running DOS
You can operate the Allegro by issuing standard DOS commands
from the DOS prompt or through a fi le management program called
FileScout (described in detail later in this chapter).
Programs for the Desktop PC and the Allegro
Desktop PC Program
The Allegro Distribution CD-ROM includes the Lynx
™ Windows
File Manager for installation onto your desktop PC. To run Lynx, the
desktop PC must be running Windows 95 or higher and must have
at least one serial port. To install Lynx on your desktop PC, insert the
Allegro Distribution CD-ROM into your computer and select Install
Lynx option. Follow the instructions given to you. The Lynx icon
appears in the Start menu when installation is complete.
❖ Note: If you have previously installed Lynx on your desktop PC we
recommend that you uninstall it and install the updated version included
on the Allegro DOS Distribution CD-ROM.
Allegro Programs
The following DOS programs are factory-installed on the Allegro:
FileScout DOS File Management Utility
Text Editor
Terminal Program
Commonly Used DOS Commands
The Lynx program, all of the Allegro programs, and the full set of the
DOS commands are included on the Allegro Distribution CD-ROM.
▲
▲