Juniper Systems Allegro DOS Manual - Manual (Page 113)

Allegro DOS Owner’s Manual 113
Solid State Disk Utilities
Some disk-on-chip utility programs are factory installed on the solid
state disk. They are also included on the Allegro Distribution CD-
ROM. When in DOS, these fi les allow you to view the status of the
disk and to reprogram it if necessary.
Name Type Description
DDEFRAG EXE Used to defragment the contents of the C:
drive. Run this on a monthly basis to keep
the solid state disk running at optimum
performance.
DFORMAT EXE Used to format the Disk on Chip. May be
needed if the C: drive is corrupted.
DINFO EXE Gives the user information about the disk
including:
* Drive Letter
* Disk Size
* Software Version
* True FFS Compatibility
* Firmware Size
DOCxxxx EXB The Flash File System (FFS) binary code. The
small xxxx in the fi le name is the version
number of this fi le. The fi le extension is
always be .EXB. This fi le is needed if the
disk is corrupted and needs to be completely
reprogrammed at the lowest level.
DUPDATE EXE This is the program used to reprogram the
disk’s binary fl ash fi le system. This fi le is
needed if the disk is corrupted and needs to be
completely reprogrammed at the lowest level.