Juniper Systems Allegro DOS Manual - Manual (Page 68)

68 Allegro DOS Owner’s Manual
Title
The name and version of the program, communication mode, and
active COM port are indicated on the fi rst line of the display. On
the sample screen shown on the previous page, the program name
and version number is FileScout v1.0c. The word Lynx is shown,
indicating that the Lynx communication mode is turned on. The
active communication port is COM1.
First Status Line
On this line the current drive, directory and subdirectory (if
applicable) are listed. If a function is being performed (make
directory, etc.) information about the function is also shown. On the
sample screen above, the current drive is C:\.
Second Status Line
This line displays the number of fi les stored in the current directory,
the number of bytes used by these fi les, and the number of bytes
free on the current drive. If a function is being performed, this line
displays information concerning the function.
Folders and Files
A list of folders and fi les within the current active folder are
displayed in the box underneath the second status line. Folder names
have square brackets around them. On the above sample screen,
[DOS] and [DATA] folders, and AUTOEXEC.BAT and CKCOM.EXE
are fi les stored on the C: drive.
Function Keys
The ten function key options are listed at the bottom of the screen.
Selecting Folders or Files in FileScout
Press the keys described below to move the highlight bar to the
folder or fi le you want to select (to copy, view, execute etc.).
Up or Down Arrow Keys
Use the arrows to move the highlight bar up or down one position.
PgUp and PgDn Keys (Page Up or Page Down)
These keys move the highlight bar up or down one screen.
▲