Interlogix Concord 4 REV J Installation Manual User Manual

Page 95

Chapter 3: Programming

Concord 4 Installation Manual

Set up schedules

Shortcut: 05XXY,
where XX is schedule
00 to 15 and Y is start
(0)/stop (1) Monday to
Sunday (2 to 8)

Default: 00:00

This menu lets you set up start/stop times for each day of the week.
Schedules used by one partition cannot be viewed or changed from a
different partition.

If you are programming schedules for your customer, be sure to record
the settings in the Concord 4 User Manual.

To set up a time schedule:

1. Press A

or B

until the display shows

SET UP SCHEDULES

2. Press #

and the display shows

SCHEDULE 00

. If you want a

different schedule number, press A

or B

until the schedule number

appears.

3. Press #

and the display shows

START TIME hh:mm

(current

setting).

4. Enter the starting time (00:00 to 23:59). The display flashes the
entered time. Press #

and the display shows

START TIME hh:mm

(new setting).

5. Press B

and the display shows

STOP TIME hh:mm

(current

setting).

6. Enter the desired stop time (00:00 to 23:59). The display flashes the
entered time. Press #

and the display shows

STOP TIME hh:mm

(new setting).

7. Press B

and the display shows

MONDAY OFF/ON

(current

setting). To select a different day, continue pressing B

until the desired

day appears.

8. Press 1

(off) or 2

(on). The display flashes the entered selection.

Press #

and the display shows the new setting for the selected day.

9. Repeat the process until all desired settings for each day are set.