Interlogix Concord 4 REV J Installation Manual - Manual (Page 41)

Chapter 3: Programming
Concord 4 Installation Manual 35
Figure 27: Programming touchpad
Programming touchpad
Programming touchpad
connector
Programming touchpad cable (60-791)
In program mode, touchpad buttons let you navigate to all installer programming
menus for configuring the system. Table 8 below describes the touchpad button
functions in program mode.
Table 8: Touchpad programming functions
Button Programming function
# Select menu item or data entry.
* Deselect menu item or cancel data entry (if pressed before #).
A ()
B () Scroll through available options at the current menu tier. Also, scroll
through sensor text options during sensor text programming.
C Enter pauses when programming phone numbers.
D Delete certain programmed settings.
0 to 9 Enter numeric values wherever needed.
1 and 2 Select off (1) or on (2) wherever needed.
1 to 6 Press and hold to enter alphabetical characters A through F for
account numbers
7 and 9 Press and hold to enter * (7) or # (9) for phone numbers.