Interlogix Concord 4 REV J Installation Manual - Manual (Page 50)

Chapter 3: Programming
44 Concord 4 Installation Manual
The following sections guide you through the tier 2 system programming menu
items as they appear in sequence:
• “Security menu” on page 45
• “Phones menu” on page 50
• “Phone options menu” on page 54
• “Timers menu” on page 57
• “Light control menu” on page 59
• “Touchpad options menu” on page 60
• “Reporting menu” on page 61
• “Siren options menu” on page 66
• “Sensors menu” on page 67
• “Audio verification menu” on page 71
• “Accessory modules menu” on page 73
• “Onboard options menu” on page 78
• “Macro keys” on page 81
Each tier 2 menu represents a group of settings related to the menu name. Some
tier 2 menus break down into settings that affect the whole system (global) or a
specific partition.
To advance to tier 2 menus from the tier 1 menu, scroll until the display shows
SYSTEM PROGRAMMING, and then press #. The display shows SECURITY (the
first tier 2 menu). You can then scroll through the tier 2 menus and submenus.
Shortcut numbers
To go directly to some settings in tier 2, you can enter the shortcut number for
that setting. Shortcut numbers in this section are provided after the setting name
(where applicable). Shortcut numbers can be used from any setting location
within tier 2.