Interlogix Concord 4 REV J Installation Manual - Manual (Page 147)

Appendix B: Reference tables
Concord 4 Installation Manual 141
Sensor number State Trigger
number State Trigger number
Sensor 95 In alarm 223 Open 351
Sensor 96 In alarm 224 Open 352
System feature event triggers
Table 29 below describes the system feature event triggers.
Table 29: System feature event trigger numbers
Feature State Trigger number
Phone test Initiated 225
AC failure For 15 minutes 226
CPU low battery Detected (excluding first minute after power-
up) 227
Auto phone test Begun 228
Receiver failure Detected 229
Back in service Alarm (AC loss, battery drain, then AC
restore) 230
Phone failure Detected 231
Buffer full Detected 232
Two trip error Detected 233
System tamper Alarm (40 incorrect code entry keystrokes) 237
Freeze Alarm 238
No activity Alarm 239
Fire panic Alarm 240
Police panic Alarm 241
Auxiliary panic Alarm 242
Opening report Occurred 243
Closing report Occurred 244
Latchkey opening or
closing Occurred 245
Duress Alarm 246
Forced armed report Occurred 247
Fire in partition Alarm 248