Speaker modeling, Speaker tyoes applicable for modelinp – Roland VS-890 User Manual

Page 76

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Algorithm List

Speaker Modeling

Models a variety of speaker characteristics ranging from those of high-end professional monitor speakers used as
the standard at studios around the world to those of speakers of small-sized TV sets and portable radios.

Speaker Modeling is adjusted so that its optimal effect is achieved when a Roland Powered Monitor DS-90A is
used in digital connection. Its effect may not be fully achieved with other types of speakers.

........................... ... "" "

..................................................................................................

Speaker tyoes applicable for modelinp

The characteristics of the following types of speakers can be modeled. Set the desired type for Model.

THRU:

No modeling is to be performed.

FLAT:

DS-90A is corrected by modeling to produce wider-range and untwisted sounds.

Pwd.BLK:

Typical model of powered monitor (two-way type, the woofer diameter = 170 mm (6-1 /
2 inches))

Pwd.E-B:

Powered monitor characterized in delightful sound quality

Pwd.MAC:

Powered monitor characterized in well-extended low frequency band sounds

SmlCUBE:

Small-sized full-range speaker widely used in recording studios

Wh.CONE:

Enclosed-type two-way speaker widely used in recording studios, characterized in

white woofers.

WhTISUE:

Mild sounds from "White Cone" Tweeter covered with tissue paper

RADIO:

Pocket-type small-sized radio

SmlTV:

Speaker attached to the 14-inch TV set

BoomBox:

Radio cassette recorder

BoomLoB:

Radio cassette recorder with the low frequency band enhanced

* Use “THRU” for clear comparison behveen sounds with and without modeling.