Roland VS-890 - Manual (Page 75)

Algorithm List
Ana log Phaser
Two units of analog phasers are placed in parallel to accommodate stereo sounds. Surges unique to Phaser is
created by adding sounds with the phase shifted periodically.
Number of stages of Phaser
As the number of sages of Phaser increases, the number of frequency points suppressed increases as well,
generating sharper effect.
>
Level
‘ 4 Stage
Frequency
Level,
L 8 Stage
■yyw
Frequency
Parameter (full name) Setting Function
APH (Analog Phaser): Two units of analog phaser are placed in parailel to accommodate stereo
sounds.
Phaser (Switch) On, Off Turns the analog phaser on or off.
Mode (Mode) 8STAGE, 4STAGE Sets the number of stages of phaser.
Freq (Frequency) 0-100 Sets the center frequency to which the phase effect is
applied.
Reso (Resonance) 0-100 Enhances frequency components at around the center
frequency set with Frequency.
LF01/2 Rate (LF01/2 Rate) 0-100 Sets the phase effect cycle length.
LF01/2 Dep (LF01/2 Depth) 0-100 Sets the depth of the phase effect cycle.
LF01/2 BMode (LF01/2 Channel B Inverse) On, Off “On" indicates that the surge phase should be inverted and
“Off” indicates that it should not be inverted.
75