Roland VS-890 - Manual (Page 124)

MIDI Implementation
F7H BOX (End oi Exclusive Message)
If the device ID on the message was as same as that of the receiving device or 7FH, the VS-
S90 resets all communication channels related svith MMC.
When powered on the VS-890 transmits as the device ID 7FH.
•WRITE
Status
FOH
Byte
FOH
7FH
Dev
06H
40H
ccH
ddH
eeH
ffH
F7H
Data Bytes
7FH,Dev,06H.40H.
ccaddH,eeH„,ffH,„
Status
F7H
Description
Status of Exclusive Message
Universal System Exclusive Message Realtime Header
Device ID (or 7FH)
MMC Command Message
WRITE
Information Bytes follows the command
The name of the writable information Field
Information Field Format
Field names and data
EOX (End of Exclusive Message)
if the device ID on the message was as same as that of the receiving device or 7FH the VS-
890 writes the data tn the specified information field.
The VS-890 does not transmit the message.
•MASKED WRITE
Status
FOH
Byte
FOH
7FH
Dev
06H
41H
04H
ddH
eeH
ffH
SgH
F7H
Data Bytes
7m,Dev,06H.41H.04H,
ddHeeHTfH.gg
Status
F7H
DescripUon
Status of Exclusive Message
Universal System Exclusive Message Realtime Header
Device ID (or 7FH)
M.MC Command Message
M.ASKED WRITE
Number of Bytes follows the command
The name of the masked type writable Information Field
Byte number to write in the Bit Map
location of the bit map bvtc to change
New’ data to w’rite to the specified bit map byte
EOX (End of Exclusive Message)
If the device ID on the message was as same as that of the receiving device or 7FK the VS-
890 writes the data to the specified bit map l^tc.
The VS-890 does not transmit the message.
•LOCATE (MCP)
OFormal 1 - LOCATE [l/F]
Status
FOH
Bvte
FOH
7FH
Dev
06H
44H
02H
ООН
nnH
F7H
PalflJyles
7FH.Dev,06H,44H.02H,O0H.nnH
Status
F7H
Description
Status of Exclusive Message
Universal System Exclusive Message Realtime Header
Device ID (or 7FH)
MMC Command Message
LOCATE (MCP)
Number oI Bytes
"i/F" sub command
Information Field (OSH, 09H, OAH, OBH, OCH, ODH, OEH, OFH)
EOX (End of Exclusive Messogc)
If the device ID on the message was as same as that of the receiving device or 7FH, the VS-
690 locates the selected time location stored to the specified information field.
The VS-890 does not transmit the message.
OFonnat 2 - LOCATE [TARGET]
Status
FOH
DatiT Bvles Status
7FH,Dev,06H,44H,06H,01 H, F7H
hrH,mnH,scH,frH,ffH
Byte Description
FOH Status of Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (or 7FH)
06H MMC Command Message
44H L(X: a TE(MCP)
06H Number of Bytes
01H TARGET'sub rommand
hrH, mnH. scH, frH, ffH Standard Time with Sub Frame
F7H EOX (End of Exclusive Message)
If the device ID on the message was as same as that of the receiving device or 7FH, the VS-
890 locates the specified time location received from the command.
if the efficient locate switch ILOC?) or MarLer switch |PREVTOUS|, (NEXT) is pi«sed, the
VS-890 transmits as the device ID 7FH.
•MOVE
Status
FOH
ËylÊ
FOH
7FH
Dev
Ü6H
4CH
02H
ddH
ssH
F7H
Data Bytes Slat»»
7FH,Dev,06H,4CH,02H,ddH,s5H F7H
Description
Status of Exclusive Message
Universal System Exclusive Message Realtime Header
Device ID (or 7FH)
MMC Command Message
MOVE
Number of Bytes
Name of the Efficient Destination Information Field
{08H,09H.0AH,0BH.0CH,0DH,0EH,0FH)
Name of the Efficient Source Information Field (OtH)
EOX (End of Exclusive Message)
If the device ID on the nussage was as same as that of the receiving device or 7FH, the VS-
890 transfers the data on the selected source information field to the destination Information
Field, If the name of both information fields is efficient.
The VS-890 does not transmit the message.
•The efficient Information Field
The followings are the efficient Information Field on the VS-890.
The name of the efficient destination Information Field :
01H SELECTED TIME CODE
OSH CPO / LOCATE POINTT
09HGP1
OAH GP2
0BHCP3
0CHGP4
ODH CP5
0EHGP6
OFH CP7
4FH TRACK RECORD READY
124