Roland VS-890 - Manual (Page 33)

Algorithm List
EQ (Equalizer)
EQ (Switch) On, Off Turns the equaiizer on or off.
LowType (Low Type) Shiv, Peak Sets the type of the iow frequency band equaiizer
(Shiving type or peaking type).
Low.G (Low Gain) -12-+12dB Sets the boost/cut amount in the iow frequency band.
Low.F (Low Frequency) 20 - 2000 Hz Sets the center frequency in the tow frequency band.
Low.Q (Low Q) 0.3-10.0 Sets the width of the area around the iow frequency that
wiii be affected by the gain settings.1 *1
Mid.G (Middie Gain) -12-+12dB Sets the boost/cut amount in the middle frequency band.
Mid.F (Middie Frequency) 200-8000 Hz Sets the center frequency in the middle frequency band.
Mid.Q (Middie Q) 0.3-10.0 Sets the width of the area around the middle frequency that
will be affected by the gain settings.
Hi Type (High Type) Shiv, Peak Sets the type of the high frequency band equalizer (Shlving
type or peaking type).
Hi.G (High Gain) -12-+12dB Sets the boost/cut amount in the high frequency band.
Hi.F (High Frequency) 1.4-20.0 kHz Sets the center frequency in the high frequency band.
Hi.Q (High Q) 0.3-10.0 Sets the width of the area around the high frequency that
will be affected by the gain settings.1 *1
Out Levei (Output Levei) 0-100 Sets the volume after passing through the equalizer.
*1: If Low Type (LowTypc) or High Type (Hi Type) is set to "Shiv (Shlving Type)," the setting for LowQ or High Q
is invalid.
33