Sfindlsolater (3-band isolator), Parameter (full name), Setting – Roland VS-890 User Manual
Page 72: Function, Algorithm list
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Algorithm List
Sfindlsolater (3-Band Isolator)
Sharply cuts off components by frequency band to eliminate undesired sounds. Useful to eliminate undesired
sounds and take out only specific sounds from a CD. Isolator can make sounds completely perish, unlike ordinary
equalizers that leave some sounds even with the gains of the respective frequency bands set to the minimum.
Parameter (full name)
Setting
Function
ISO (3*band Isolator):
Isolater (Switch)
Divides the input sound into three frequency bands to abstract or eliminate the
sound.
On, Off
Turns the 3-band isolator on or off.
HiLvl (High Level)
-60- +4 dB
Increases or decreases frequency bands in the high
frequency band.
MidLvl (Middle Level)
-60— +4 dB
Increases or decreases frequency bands in the middle
frequency band.
LowLvl (Low Level)
-60— +4 dB
Increases or decreases frequency bands in the low
frequency band.
APMMixSw (Anti-phase Middle Mix Switch)
On, Off
Mutes or leaves the middle frequency band sound.
APMLev (Anti-phase Middle Level)
0-100
Sets how much of the middle frequency band sound should
be muted.
APLMixSw (Anti-phase Low Mix Switch)
On, Off
Mutes or leaves the low frequency band sound.
APLLev (Anti-phase Low Level)
0-100
Sets the amount of the low frequency band sound should
be muted.
72