Roland VS-890 - Manual (Page 41)

Algorithm List
FLG (Pianger):
Ranger (Switch)
Adds effects similar to ascending/descending sound of a jet.
On, Oft Turns the flanger on or off.
Rate (Rate) 0.1-10.0 Hz Sets the rate of modulation for the flanger.
Depth (Depth) 0-100 Sets the depth of modulation for the flanger.
Manual (Manual) 0-100 Sets the center frequency subject to application of the
flanger effect.
Reso(Resonance) 0-100 Enhances frequency components at around the center
frequency set with Manual.
¡lay): Adds a delayed sound to the direct sound, adding depth to the sound or creating speciai effect
Delay (Switch) On, Off Turns the delay on or off.
Time (Delay Time) 0-1000 ms Sets the time from direct sound until when the delay sound
Is heard.* *1
Shft (Shift) L1000-0-R1000 ms Sets the delay time difference between the right and left
delay sounds.
FBTim (Feedback Delay Time) 0-1000 ms Sets the feedback repetition cycle.
FBLevel (Feedback Level) -100-100 Sets the amount of the delay sound should be returned to
the delay input.
EFLevel (Effect Level) -100-100 Sets the volume of the delay sound.
DILevel (Direct Level) -100-100 Sets the volume of the direct sound.
*1: The sum of the Delay Time value and the Delay Shift value should not exceed the setting range of Delay Time.
For example, if Delay Time is set to 800 ms, the setting range of Delay Shift is L200 to R200 ms.
41