Roland VS-890 - Manual (Page 47)

Algorithm List
St Phaser (Stereo Phaser)
A phaser adds a phase-shifted sound to the direct sound, producing a twisting modulation that creates
spaciousness and depth.
Parameter (full name) Setting Function
PHS (Phaser):
Phaser (Switch)
Adds a sound with a shifted phase to the direct sound to add spaciousness to the sound.
On, Off Turns the phaser on or oft.
Mode (Mode) 4, 8,12,16 Sets the number of stages in the phaser (p. 75).
Rate (Rate) 0.1-10.0 Hz Sets the rate at which the phaser will modulate.
Depth (Depth) 0-100 Sets the depth of modulation.
Pol (Polarity) Sync, Inv Sets the right and left phases of modulation. *3
Manual (Manual) 0-100 Sets the reference frequency for adding the surging effect
to the sound.
Reso(Resonance) 0-100 Enhances frequency components at around the center
frequency set with Manual. *1
CrossFB (Cross-Feedback Level) 0-100 Sets the amount of the phaser sound to be returned to the
channel opposite to the one used for input. *2
EFLevel (Effect Level). -100-100 Sets the volume of the phaser sound.
DiLevel (Direct Level) -100-100 Sets the volume of the direct sound.
Continued...
47