Roland VS-890 - Manual (Page 32)

Algorithm List
StPS-Delay (Stereo Pitch Shifter Delay)
Changes the pitch of the direct sound. Corrects vocals out of tune or adds thickness to the sound by mixing the
direct sound and a sound at a shifted pitch.
Setting up pitch
Chromatic Pitch (Cromatic) is used for major pitch variation while Fine Pitch (Fine) is used for fine adjustment.
Setting up slightly different pitches for the right and left gives thickness to the sound.
Parameter (full name) Setting Function
Pitch Shifter Deiay
PS-Delay (Switch)
: Shifts the pitch.
On, Off Turns the pitch shifter on or off.
L-CP (Lch Chromatic Pitch) -12-12 Sets the left-side pitch variation (by serriitone).
R-CP (Rch Chromatic Pitch) -12-12 Sets the right-side pitch variation (by semitone).
L-F.P (Lch Rne Pitch) -100-100 Sets the left-side pitch variation (by cent).
R-F.P (Rch Fine Pitch) -100-100 Sets the right-side pitch variation (by cent).
L-PDLY (Lch Pre-Delay) 0-50 ms Sets the time from when the direct sound Is output until
when the left-side sound at a shifted pitch is output.
R-PDLY (Rch Pre-Delay) 0-50 ms Sets the time from when the direct sound is output until
when the right-side sound at a shifted pitch is output.
L-FBD (Lch Feedback Delay Time) 0-500 ms Sets the feedback repetition cycle for the left-side delay
sound.
R-FBD (Rch Feedback Delay Time) 0-500 ms Sets the feedback repetition cycle for the right-side delay sound.
L-FBLvl (Lch Feedback Level) -100-100 Sets the amount of the left-side sound at a shifted pitch
should be returned to the left pitch shifter input.
R-FBLvl (Rch Feedback Level) -100-100 Sets the amount of the right-side sound at a shifted pitch
should be returned to the right-side pitch shifter input.
L-CFBLv (Lch Cross-Feedback Level) -100-100 Sets the amount of the left-side sound at a shifter pitch
should be returned to the right-side pitch shifter input.
R-CFBLv (Rch Cross-Feedback Level) -100-100 Sets the amount of the right-side sound at a shitted pith
should be returned to the left-side pitch shifter input.
EFLevel (Effect Level) -100-100 Sets the volume of the sound at a shifter pitch.
DiLevel (Direct Level) -100-100 Sets the volume of the direct sound.
32