Roland VS-890 - Manual (Page 44)

Algorithm List
Rotary
Simulates a rotary speaker. Behaviors of high and low frequency band Roters can be set up separately, allowing
realistic modeling of unique surging sensation. This effect is suited for organ sounds.
Input L
Input R
Parameter (full name) Setting Function
NS (Noise Suppressor):
NoiseSup (Switch)
Mutes noise in the siient mode.
On, Off Turns the noise suppressor on or off.
Thresh (Threshold) 0-100 Sets the level to start muting noise.
Release (Release) 0-100 Sets the time over which the volume will drop to 0 after the
noise starts being muted.
ODV (Overdrive):
OvDrive (Switch)
Adds distortion to the sound.
On, Off Turns overdrive on or off.
Gain (Gain) 0-100 Sets the degree of sound distortion.
Level (Level) 0-100 Sets the volume of the overdrive sound.
ROT (Rotary Speaker):
LRate (Low Rate)
Simulates a rotary speaker.
0.1-10.0 Hz Sets the rotary frequency of the low frequency band roter.
HRate (High Rate) 0.1-10.0 Hz Sets the rotary frequency of the high frequency band roter.
GuifarAmpSim (Guitor Amplifier Simulator)
Simulates a guitar amplifier.
Input L
Input R
44