Roland VS-890 - Manual (Page 58)

Algorithm List
Reverb 2
This gate reverb works in either of two modes of gate operation (Gate/ Ducking). In the Gate mode, the gate opens
when a certain volume (Threshold Level) is exceeded while in the Ducking mode, the gate opens when the
volume becomes as low as or lower than Threshold Level. You can use two reverbs (FXl and FX2) wth different
settings, or use it in combination with a previous reverb.
Input L
Input R
Direct Level
--------- >_
Reverb 2
1
i
Direct Level
3BAND EQ
r*- 3BAND EQ
Output L
Output R
-1
Reverb types
There are five reverb types; You can choose the type with Reverb Type.
Rooml: Ordinary room reverb
Room2: Room reverb with a softer tone compared with Rooml
Halil: Ordinary hall reverb
Hall2: Hall reverb with a softer tone compared with Halil
Plater Plate reverb
Selectinq Gate type
Reverb sounds have different effects depending on the gate operation tjrpes. Use Gate Mode to select the type.
Gate: The gate opens when the volume of the direct sound exceeds the value set with
Threshold Level (Thres). The gate closes when the volume drops below the Threshold
Level value.
Ducking: Operates in the opposite manner as in the "Gate" mode. The gate closes when the
volume of the direct sound exceeds the value set with Threshold Value. The gate opens
when the volume becomes as low as or lower than the Threshold Level value.
_________ _______________________ _________ ____
J
58