Kofax Communication Server 9.1.1 - Manual (Page 44)

TC/WEB Tcweb_User_50112.Doc
©Kofax, Inc. 44 / 85
2.7.7 Job Notifications
TC/Broadcast only:
A user can select to send notifications for three
job events:
When a job is started.
When a job is completed.
When a job changes to an error state.
For each job event it is possible to set up to 9
addresses that should receive a notification.
Each notification address requires a service and
a number. The Attention field is optional.
For the end notification of a job a user can select
to send a notification on successful and/or
unsuccessful termination.
If a job goes into an error state (some recipients
are not reachable), a user can select if a
notification should be sent, and/or the job should
be sent to the customer care center of the
TC/Broadcast service provider.
Several check boxes allow the behavior of the
notifications to be configured:
Include details for successful
transmission: The Job End
Notification will display details for every
address that the message was
successfully delivered to.
Include details for
unsuccessful transmission: The
Job End Notification will display details
for every address that the message
could not be delivered to.
Send error report: When a job
cannot be created, send a Job Error
Notification.
Intercept on error: When a job
cannot be created, forward the Job
Request to the Problem Job Items tool
so a system operator can correct it.
Resend failed message: If
checked, the job end event creates a
new job containing the failed addresses.
Picture 92: Setting job notifications