KEYENCE BL-180 - Manual (Page 106)

Power Supply BL-U1
100
7 BL-U1 Specifications
Model BL-U1
Power supply for bar code reader 5 VDC±5% (1.5 A)
Power supply for sensor 12 V ±10% (300 mA)
T
rig
g
er input
Input rating 8.5 to 30 VDC, 10 mA max.
Max. OFF current 1.0 mA
OK/NG output
Output type NPN open-collector
Rated load 30 VDC, 100 mA
Leakage current (at OFF) 0.1 mA max.
Residual voltage (at ON) 1 V max.
Interface
RS-232C, RS-422A, RS-485 multidrop
(Up to 31 units can be connected.
Max. cable extension: 1.2 km)
En
vir
onment
Ambient temperature 0 to 50°C
Relative humidity 35 to 85%
Ambient atmosphere No dust, no corrosive gas
Vibration
10 to 55 Hz, 1.5 mm double amplitude in X, Y
and Z directions, two hours respectively
Noise immunity 1000 V p-p, 1 µs (Power line)
Insulation resistance
At least 100 M
Ω
across earth ground and AC
power supply terminals (by 500 VDC Megger)
Insulation withstand voltage
1500 VAC across earth ground and AC power
supply terminals, for 1 minute
Rating
Power supply voltage 100 to 240 VAC (50/60 Hz)
Current consumption 40 VA (100 VAC), 50 VA (240 VAC)
Weight Approx. 615 g (including cable)