KEYENCE DL-CL1 - Manual (Page 65)

4-3
4
Sp
e
c
ific
a
tio
n
s
- CC-Link Compatible Network Unit DL-CL1 User’s Manual (FD-S) -
4-2
Data Processing Times
This section describes the length of time taken from detection by a sensor(s) to data
processing by PLC.
Maximum data processing time = (1) + (2) x 2 + (3) + (4)
(1) PLC scan time
(2) Network scan time
(3) Data communication time of DL-CL1
(4) Response time of sensor amplifier
(3) Data communication time of DL-CL1
The lengths of time taken for the data of output or current value to be sent from a
sensor amplifier to the DL-CL1 are summarized below.
For information on (1), (2), and (4), refer to the manual of each unit.
Number of sensor amplifier units connected Output, judgment value, or current value
1 9 ms
2 11 ms
3 15 ms
4 17 ms
CPU unit
CC-Link
master unit
DL-CL1 Sensor amplifier
(1) (2) (3) (4)