KEYENCE DL-CL1 - Manual (Page 20)

2-1 Installation and Connection to Sensor Amplifiers
2-4 - CC-Link Compatible Network Unit DL-CL1 User’s Manual (FD-S) -
2
C
onn
ec
tion
a
nd
C
onf
ig
u
ra
ti
o
n
Procedures for connecting to sensor amplifiers
The CC-Link compatible communication unit DL-CL1 must be connected to sensor
amplifiers before it can provide its function.
For the instructions on connecting additional sensor amplifiers, refer
to the instruction manual of the sensors amplifiers.
1
Remove the expansion protective cover from the sensor amplifier to be
connected.
2
Install the CC-Link compatible communication unit DL-CL1 on the DIN rail
and connect to the sensor amplifier.
Ensure a tight connection, leaving no space between the CC-Link compatible
communication unit DL-CL1 and the sensor amplifier.
Make sure that the power to the sensor amplifier is off before starting to
connect the CC-Link compatible communication unit DL-CL1. Perform-
ing the procedure with the power on may damage the DL-CL1.
NOTICE
Point
Sensor amplifier
Expansion protective cover
Sensor amplifier
CC-Link compatible
communication unit DL-CL1
Connector