KEYENCE DL-CL1 - Manual (Page 44)

3-2 Device Maps
3-16 - CC-Link Compatible Network Unit DL-CL1 User’s Manual (FD-S) -
Co
mm
u
ni
c
a
ting
w
ith t
he FD
-S
s
er
ie
s
3
Remote Register RWw (Master Station -> DL-CL1)
Number [n] denotes the first data memory number assigned to the DL-CL1.
*1 See "Reading/Writing Settings or Status of a Sensor Amplifier" (page 3-21).
See "Issuing a Motion Command to a Sensor Amplifier" (page 3-20).
*2 See "Rewriting a Setting Value of a Sensor Amplifier" (page 3-21).
Operating
mode
Device no.
(HEX)
Name
Communication
method
Description Writing range
Monitor mode
2
Full mode
1
Full mode
2
RWw[n] + 00
Data category/
command
number
*1
Used when communicating under handshake
control program.
Specifi es the data category and command
number of the parameter to be communicated.
·Upper byte:
00h - FFh
·Lower byte:
00: Read
01: Write
02: Motion
command
RWw[n] + 01 Data number *1
Used when communicating under handshake
control program.
Specifi es the data number of the parameter to
be communicated.
0000h - FFFFh
RWw[n] + 02
to 03
(2 words)
Data to write *1
Used when communicating under handshake
control program.
Specifi es the data to be written in the
parameter to be communicated.
The data type
depends on the
parameter type.
RWw[n] + 04 (Not used) - - -
RWw[n] + 05 System reserved - Unusable -
RWw[n] + 06
to 07
(INT32)
Instantaneous
fl ow rate
setting-1 (P1)
rewrite data
*2
Stores the instantaneous fl ow rate setting
value 1 (P1) to be written in the sensor
amplifi er.
INT32 (LITTLE)
RWw[n] +08
to 09
(INT32)
Instantaneous
fl ow rate
setting-2 (P2)
rewrite data
*2
Stores the instantaneous fl ow rate setting
value 2 (P2) to be written in the sensor
amplifi er.
INT32 (LITTLE)
RWw[n] + 0A
to 0B
(INT32)
Temperature
upper limit
setting rewrite
data
*2
Stores the temperature upper limit setting
value to be written in the sensor amplifi er.
INT32 (LITTLE)
RWw[n] +0C
to 0D
(INT32) Temperature
lower limit setting
rewrite data
*2
Stores the temperature lower limit setting
value to be written in the sensor amplifi er.
INT32 (LITTLE)
RWw[n] +0E
to 0F
(INT32) Integrated fl ow
quantity setting-1
rewrite data
*2
Stores the integrated fl ow quantity setting
value 1 to be written in the sensor amplifi er.
INT32 (LITTLE)
RWw[n] + 10
to 1F
System reserved - Unusable -
RWw[n] + 20
to 3F
System reserved - Unusable -