Hardy HI 2151/30WC Single-Scale Controller - Manual (Page 72)

HI 2151/30WC MANUAL
5-8
Print Output Options
If you want to print mode value(s) selected, such as G (Gross weight),
N (Net weight) or T (Tare) on demand, select "P."
a. Press the up or down arrow until the letter "P" appears.
b. Now when the Print button is pressed it will print the
Gross, Net, or Tare weights, whichever one is selected.
c. If you select all three, "GNT", it will print all three in
sequential order.
NOTE: If your input device cannot handle rapid input of data, do not select more than one
mode.
• If you don't want this function, press the up or down arrow
until a space "_" appears.
• To output what appears on the display, select "D".
a. Press the left arrow one time to select "D" (BCD).
b. Press the up or down arrow until the "D" appears.
c. Now whatever mode appears on the display it is output.
• If you do not want output, press the up or down arrow until
a space appears "_".
Step 5. Output Mode Options
• Tare Mode
a. Press the left arrow two times to select "T".
b. Press the up or down arrow until the "T" appears.
c. Now when the Output is triggered by the BCD Control-
ler, the Tare Weight is sent.
d. If you do not want to select the Tare mode, press the up
or down arrow until a space appears "_".
• Net Mode
a. Press the left arrow one time to select "N".
b. Press the up or down arrow to until the N appears.
c. Now when the BCD Controller triggers the output, the
Net Weight is sent.
d. If you do not want to select Net mode, press the up or
down arrow until a space appears "_".
• Gross Mode