Hardy HI 2151/30WC Single-Scale Controller - Manual (Page 68)

HI 2151/30WC MANUAL
5-4
• Analog Transmitter(s)
• BCD Port
• Remote I/O
• PROFIBUS
• The key also enters the digit "7".
8/Cal • This key opens the Calibration set up menu.
• The key also enters the digit "8".
9/
↓
• This key moves backward through a menu, step by step and will
wrap to the beginning of the menu.
• Selects user selectable formats in the Serial and optional BCD
menus.
• Pauses the Self-Tests.
• The key also enters the digit "9".
0/Exit • This key Exits a menu/sub-menu back to the normal operating
mode when text is on the screen
NOTE: The zero key is used to exit a menu when numbers are entered (See Zero).
• The key also enters the digit "0".
Enter • When changing numerical values in a sub-menu, this key accepts or
rejects the value.
• When a value is accepted a "GOOD" message will appear on the
display and step forward to the next item on the menu.
• When a value is rejected, an "ERR" message appears on the display
along with the entered value, allowing the user to change the value.
For a list of error messages see Chapter 7, Troubleshooting.