Hardy HI 2151/30WC Single-Scale Controller - Manual (Page 174)

HI 2151/30WC MANUAL
OPTIONS: Press the 7/Option key to enter the opti0ns menu and record the results. (The order of parameters may vary from
this list, depending on which options were installed.)
OPTIONS
ROC
UNITS___________________________________________
TBASE___________________________________________
BARGR
BAR - LO_________________________________________
BAR - HI__________________________________________
BCD
FORMAT_____ _____ _____ _____ _____ _____
AN OUT 1 AN OUT 2
AN LO_____________________ ___________________
AN HI______________________ ___________________
SERIAL PORT
SERCON [ ] Print
[ ] bi-dir
BAUD_______________________
PARITY [ ] odd
[ ] even
[ ] none
STOPS [ ] 1 bit
[ ] 2 bits
LENGTH [ ] 7 bits
[ ] 8 bits
FORMAT__ __ __ __ __ __
CONTRL [ ] softre
[ ] hardre
ECHO [ ] On
[ ] off
ADDRES _______________________ ____________________
RIO
RATE________________________________________________
RAC NO ______________________________________________
OTR NO ______________________________________________
L-OTR _______________________________________________