Cub Cadet Fun Runner - Manual (Page 49)

4-33
LIGHTS REMOVAL & INSTALLATION
STEP DETAILS
Make vehicle safe. Switch off and key removed.
Parking brake set.
Replace turn signal bulb (Figure 4-44). Twist turn signal receptacle about ¼ turn
counterclockwise and remove from fixture.
Unplug bulb and replace.
Insert receptacle into fixture and turn clockwise
¼ turn into detent.
Replace tail/brake light bulb (Figure 4-45). Press locking tab down from inside slot and
rotate receptacle about ¼ turn to remove from
fixture.
Unplug bulb and replace.
Insert receptacle into fixture and turn clockwise
¼ turn until tab on receptacle contacts flange on
fixture.
Replace headlight bulb (Figure 4-46) and
Figure 4-47). Rotate headlight assembly counterclockwise and
extract from fixture.
Release catches and unplug bulb assembly from
its base plug.
Replace bulb assembly.
Insert bulb assembly into fixture and rotate
clockwise until seated.
Check lights. Make sure new bulb is operating properly.