Brookfield DV2+Pro Viscometer - Manual (Page 9)

Brookfield Engineering Labs., Inc. Page 9 Manual No. M03-165-F0612
Temperature Accuracy: ±1°C | -100°C to +149°C
±2°C | +150°C to +300°C
Operating Environment: 0°C to 40°C temperature range (32°F to 104°F)
20% - 80%R.H.: non-condensing atmosphere
Ball Bearing Option:
If you ordered the ball bearing suspension system with your new instrument please note
the following:
1) The ball bearing suspension in your Brookfield instrument is noted on the serial tag
on the back of the head by the letter “B” after the model.
2) When attaching and detaching the spindle, it is not necessary to lift the coupling where
the spindle connects to the instrument.
3) The Oscillation Check explained in Appendix K, Fault Diagnosis and Troubleshooting,
does not pertain to this instrument.
Electrical Certifications:
Conforms to CE Standards:
BSEN 61326: Electrical equipment for measurement, control and laboratory use - EMC
requirements
BSEN 61010-1: Safety requirements for electrical equipment, for measurement, control
and laboratory use
Notice to customers:
This symbol indicates that this product is to be recycled at an appropriate collection center.
Users within the European Union:
Please contact your dealer or the local authorities in charge of waste management on how to
dispose of this product properly. All Brookfield offices and our network of representatives and
dealers can be found on our website: www.brookfieldengineering.com
Users outside of the European Union:
Please dispose of this product according to your local laws.
I.4 Installation
Note: “IQ, OQ, PQ”, a guideline document for installation, operation and performance
validation for your DV-II+Pro digital viscometer can be downloaded from our
web site www.brookfieldengineering.com.
1) Assemble the Model S Laboratory Stand (refer to assembly instructions in Appendix I).
2) Put the viscometer on the stand.