Brookfield DV2+Pro Viscometer User Manual
Page 28
Brookfield Engineering Labs., Inc.
Page 28
Manual No. M03-165-F0612
On entry to the Options menu, the following rules regarding current viscometer operation are in
force:
1. Printer output will be suppressed when in the Custom Speed option, the Time to Torque
and Time to Stop options, the Download A Program and Run A Program options. It
will be continued when any other option is selected.
2. If the motor is ON when the user enters the Options menu, choices will be limited to:
CGS/SI units (under SETUP), °F/°C units (under SETUP), PRINTING SELECTIONS
and PC PROG.
3. The last selected menu option will be flashing.
Selecting an Option
The following is a quick reference for entering and using the OPTIONS menu:
Press
OPTIONS
TAB
to enter Options Menu.
Press
or
to scroll to a specific option.
For Options:
Press
OPTIONS
TAB
to toggle between the choices available for a specific option when indicated.
Press
ENTER
AUTO
RANGE
to select the flashing option.
IV.2 Setup
From the main Options screen, the user scrolls up or down until the following screen is displayed:
SETUP
DTIME TO TORQUE
Figure IV-2
A press of the
ENTER/AUTORANGE
key takes you into the Setup sub-menu (Figure IV-3). As in the
main Options menu, you can scroll up or down through the various Setup options. In order to
access all options, the motor must be turned off.
#
$