Brookfield DV2+Pro Viscometer User Manual
Page 40

Brookfield Engineering Labs., Inc.
Page 40
Manual No. M03-165-F0612
IV.3.5 Download a Program
Please refer to Section V for details on how to create a program before proceeding with this section.
In the Options menu, scroll to the screen shown in Figure IV-34:
D PC PROG OFF
DOWNLOAD A PROG
Figure IV-34
Refer to Section IV for information on how to create B.E.V.I.S. programs on a PC which can be
downloaded to the DV-II+Pro Programmable Viscometer.
Press the
ENTER/AUTORANGE
key to download a B.E.V.I.S. program as shown in Figure IV-35:
LOAD TO SLOT#1
↑↓
PRESS ENTER KEY
Figure IV-35
Select a number from one (1) to four (4) using the
UP/DOWN ARROW
keys assign a storage location
for the program to be downloaded.
Note:
Remember to keep track of what program is in what slot. If you
elect to download a new program to an active slot, you will overwrite
the program currently residing in that slot. The programs are saved
automatically when the viscometer is turned off.
After selecting the slot number, press the
ENTER/AUTORANGE
key and the screen shown in Figure IV-
35 changes as follows: the top line flashes while the bottom line disappears. This flashing screen
will be displayed for as long as it takes to download the program. At the end of the download,
Figure IV-36 is displayed:
DOWNLOAD DONE TO
EXIT PRESS A KEY
Figure IV-36
If a PC is not attached, Figure IV-37 will be displayed:
B.E.V.I.S. ERROR
NO PC ATTACHED
Figure IV-37
#
$