Brookfield DV2+Pro Viscometer - Manual (Page 41)

Brookfield Engineering Labs., Inc. Page 41 Manual No. M03-165-F0612
A press of any key (except the
MOTOR ON/OFF/ESCAPE
key) will take the user back a level to Figure
IV-34 where you may elect to download another program or, with a press of the
MOTOR ON/OFF/
ESCAPE
key, return to the screen of Figure IV-33.
IV.3.6 Run a Program
In the Options menu, scroll to the screen shown in Figure IV-38:
DOWNLOAD A PROG
RUN A PROG
Figure IV-38
Press the
ENTER/AUTORANGE
key to run a B.E.V.I.S. program as shown in Figure IV-39:
RUN PGM SLOT#1 ↑↓
PRESS ENTER
Figure IV-39
Using the
UP/DOWN ARROW
keys, select one of the four (4) stored programs. Press the
ENTER/
AUTORANGE
key. Any attempt to select a program slot that does not contain a program will result
in a double beep for each key press. When a valid program slot is selected, the screen in Figure
IV-40 is displayed:
PRINT KEY = LIST
ENTER KEY = RUN
Figure IV-40
At this point, you may elect to print the B.E.V.I.S. program by pressing the
PRINT
key or start the
program immediately by pressing the
ENTER/AUTORANGE
key (remember: pressing the
MOTOR ON/
OFF/ESCAPE
key will stop the current operation and bring you back one menu level). You may
elect to print the program, to confirm the slot choice as correct or simply to have it available later
when reviewing data. If you elect to print the program, you will return to the screen of Figure
IV-39 after the program is finished printing. Pressing the
ENTER/AUTORANGE
key exits the screen
of Figure IV-39 and the program will start running.
On program start, the screen could be any of the screens possible when running a B.E.V.I.S.
program. A typical screen might be:
USE SPINDLE 31
PRESS A KEY
Figure IV-41
#
$