Brookfield DV2+Pro Viscometer - Manual (Page 88)

Brookfield Engineering Labs., Inc. Page 88 Manual No. M03-165-F0612
Appendix G - Speed Sets
The following speed sets and custom speeds are selectable from the SETUP menu option. All
speeds are in units of RPM.
The DV-II+Pro has the sequential speed set in-
stalled at Brookfield prior to shipment.
The DV-II+Pro can be pro-
grammed to select up to 18 of the
above speeds for use at any one
time. Speed 0.0 is automatically
included as the 19th speed.
Sequential
Speed From
0.0
0.3
LVT
0.6 LVT
1.5 LVT
3.0 LVT
6.0 LVT
12.0 LVT
30.0 LVT
60.0 LVT
0.0
0.5
RVT
1.0 RVT
2.0 RVF
2.5 RVT
4.0 RVF
5.0 RVT
10.0 RVT
20.0 RVT
50.0 RVT
100.0 RVT
Interleave
Speed From
0.0
0.3
LVT
0.5 RVT
0.6 LVT
1.0 RVT
1.5 LVT
2.0 RVF
2.5 RVT
3.0 LVT
4.0 RVF
5.0 RVT
6.0 LVT
10.0 RVT
12.0 LVT
20.0 RVT
30.0 LVT
50.0 RVT
60.0 LVT
100.0 RVT
Custom
Speed Speed Speed
0.0 3.0 100.0
0.01 4.0 105.0
0.03 5.0 120.0
0.05 6.0 135.0
0.07 7.5 140.0
0.09 8.0 150.0
0.1 10.0 160.0
0.2 12.0 180.0
0.3 15.0 200.0
0.4 17.0
0.5 20.0
0.6 22.0
0.7 25.0
0.8 30.0
0.9 35.0
1.0 40.0
1.1 45.0
1.2 50.0
1.4 60.0
1.5 70.0
1.8 75.0
2.0 80.0
2.5 90.0
OR OR
Note: Additional speeds are available when using Rheocalc Software
(DV-II+Pro in external mode - see section II.9).