Brookfield DV2+Pro Viscometer - Manual (Page 26)

Brookfield Engineering Labs., Inc. Page 26 Manual No. M03-165-F0612
IV. OPTIONS
IV.1 OPTION
TAB
F
Introduction to OPTIONS
The
OPTIONS/TAB
key provides access to the configuration (Setup) of the DV-II+Pro Viscometer as
well as special functions that can enhance the user’s ability to make viscosity measurements.
The Options menu, shown in Table 1, gives a complete picture of the various configuration choices
and special functions.
Quick References to Options
Table 2
Options Menu
SETUP:
Temperature — °F or °C
Units — CGS or SI
* Speed Sets — Sequential, Interleave, Custom
Printer Port — Serial (RS232) or Parallel
Data Averaging — Display Only
* TIME TO STOP
*
TIME TO TORQUE
SET PRINT TIME:
Set the Printing Time
PC PROG (ON/OFF):
Enables/Disables Communication of Serial (RS232) Port
*
DOWNLOAD A PROGRAM:
Link to PC to Receive a B.E.V.I.S. Program
(B.E.V.I.S. = Brookfield Engineering Viscometer Instruction Set)
*
RUN A PROGRAM:
Execute a B.E.V.I.S. Program
*Not available when motor is ON
Pressing
OPTIONS/TAB
places you into the Options menu at the last option selected. The following
keys are active and perform as follows:
£
UP ARROW
- Scrolls up through menu or selects new value from list.
£
DOWN ARROW
- Scrolls down through menu or selects new value from
list.
OPTION
TAB
F OPTIONS/TAB
- Toggles between options.