Welch Allyn LC101 CO2 Module - User Manual - Manual (Page 83)

LC101 CO
2
Module OEM Implementation Manual
Welch Allyn OEM Technologies Confidential Page 83
Appendix F
CO
2
Developer’s Kit
Introduction
The CO
2
Developer’s Kit provides hardware and software to simulate a monitoring system
capable of measuring and displaying real-time carbon dioxide measured in a patient’s exhaled
breath. The system also displays breath parameters such as end-tidal CO
2
, inspired CO
2
, and
respiration rate. The following items make up the CO
2
Developer’s Kit:
• CO
2
Module (LC-101)
• CO
2
Module Evaluation Platform
• Evaluation Platform Power Supply
• Serial Cable (9pin D-Type)
• CO
2
Monitor Windows Software (CD) operating on a PC with these minimum
requirements: 200 MHz Pentium, 32MB of RAM, 10MB of hard drive space.
NOTE Several different versions of the CO
2
Developer’s Kit are available depending on the
customer requirements. Contact Welch Allyn OEM Technologies for more information.
Disclaimer
The CO
2
Evaluation System does not have regulatory approval and is not intended for clinical
use. It is only intended as an engineering evaluation tool.