3 configuring communication parameters, 3 configuring communication parameters -3-1 – Casio 330 User Manual
Page 916
20060301
17-3-1
Configuring Communication Parameters
17-3 Configuring Communication Parameters
Before trying to transfer data with the ClassPad, you should perform the procedures
described in this section to configure its data communication parameters.
S ClassPad Operation
(1) On the application menu, tap
.
• This starts the Communication application and displays a window that shows its
current communication parameter settings.
(2) Tap [Setup] and then [Open Setup Menu].
• This displays a dialog box for changing communication parameters, like the one
shown
below.
(3) Configure the communication parameter settings as described below.
• Items marked with an asterisk (
*
) are initial defaults.
\
\ S Screen Copy To
Specify “Outer Device”.
\
\ S Cable Type
When connecting to this type of device:
Another ClassPad unit or a Data Analyzer
A computer’s USB port
Select this setting:
3pin cable
USB cable*