Rice Lake 820i Programmable Indicator/Controller - Installation Manual - Manual (Page 22)

18 820i Installation Manual
3.2 Menu Structures and Parameter Descriptions
The
820i
indicator can be configured using a series of menus accessed through the indicator front panel when the
indicator is in setup mode. Table 3-1 summarizes the functions of each of the main menus.
Table 3-1. 820i Menu Summary
Menu Menu Function
SCALES Configuration Configure and calibrate scales.
SERIAL Serial Configure communications ports.
FEATURE Feature Set date and time formats, truck mode, passwords, keyboard locks, regulatory mode, and
initial consecutive number value, define softkeys and setpoint prompts.
DISPLAY Display Features Adjust display contrast and set backlighting on or off; set number of scale widgets shown (1
or 2).
PFORMT Print Format Set print format used for header, gross, net, truck in/out, setpoint, and auxiliary ticket
formats. See Section
6.0 on page 54 for more information.
SETPTS Setpoints Configure setpoints and batching mode.
DIG I/O Digital I/O Assign digital input/output functions.
ALGOUT Analog Output Configure analog output module. Used only if analog output option is installed.
VERSION Version Display installed software version number. The Reset Config softkey on the Version menu
can be used to restore all configuration parameters to their default values.
The following sections provide graphic representations of the
820i
menu structures and tables describing the
menu parameters. Default values are shown in bold type; numeric ranges and string values are shown in italic
type. Parameters shown surrounded by a dotted-line box only appear under the special circumstances explained
under each box.
SCALES SERIAL FEATURE PFORMT SETPTS DIG I/O ALGOUT VERS
Shown only if
Analog Output
card is installed
DISPLAY
Figure 3-3. Configuration Menu Flow