ETS-Lindgren 2090 Controller - Manual (Page 39)

Model 2090 Multi-Device Controller
HARDWARE ERRORS:
The following errors are not limited to the startup process,
and should not occur under normal operation. In the event
of such an error, power off the unit for several seconds and
power it back on. If the error recurs, contact ETS for
service.
E996 BERR Error
E997 Uninitialized Interrupt
E998 Spurious Interrupt
E999 Invalid Interrupt Error
Refer to “Appendix B” for more information on error
conditions and possible causes.
©ETS-Lindgren, April 2006 39
Revision G– P#399199