ETS-Lindgren 2090 Controller User Manual

Page 23

Model 2090 Multi-Device Controller

CURRENT POSITION key – Pressing this key will

display the current position of the primary device in the

corresponding display.

CURRENT POSITION indicator – Lights to indicate that

the numerical display represents the current position of the

primary device. This is the default state.

DOWN/CCW key – Pressing this key will display the

upper limit for the current polarization of a tower, or the

counterclockwise limit of a turntable, reverberation paddle,

or MAPS in the corresponding display.

DOWN/CCW indicator – Lights to indicate that the

numerical display represents the lower limit of a tower, or

the counterclockwise limit of a turntable, reverberation

paddle, or MAPS.

ENTER key – Pressing this key toggles the edit mode on

or off. With the edit mode off, pressing ENTER will

initiate edit mode for the currently displayed limit or

parameter. Pressing ENTER while in edit mode will store

the modified limit or parameter and exit edit mode.

NOTE: This key only works when the device is not in

motion.

INCRM (INCREMENT) key – Pressing this key will

increment the currently highlighted digit of the limit,

position, parameter, or speed selection in the display

window. For limits, position, and parameters, if the Model

2090 is not already in edit mode, it will automatically

switch to edit mode.

NOTE: With the exception of changing the speed selection,

this key only works when the device is not in motion.

DECRM (DECREMENT) key – Pressing this key will

decrement the currently highlighted digit of the limit,

Revision G– P#399199