ETS-Lindgren 2090 Controller User Manual

Page 149

Model 2090 Multi-Device Controller

show the target version from the upgrade file. The boxes

under “UDC Firmware Information” will also indicate if

ere are any problems or incompatibilities between the

program, the upgrade file, and the device to be upgraded.

Refer to the following figure for a typical screen.

Figure 8 Universal Device Controller Upgrade Utility

Press the “Upgrade” button to initiate the upgrade process.

The flash upgrade file may contain additional

documentation encoded into it, which will be displayed

prior to starting the upgrade process. Once the u

pgrade is

itiated, the Model 2090 will reset itself, entering a

grade of

the firmware. The Model 2090 will display the bootstrap

“bootstrap” mode, which will handle the actual up

code revision level, such as “

FLASH r1.00

” followed by

“

FLASH CODE

” in the displays. The program should

immediately start the download, displaying the status in a

dialog. The Model 2090 will also report its status by

displaying the percentage complete in the right hand

display window.

149

Revision G– P#399199