ETS-Lindgren 2090 Controller User Manual

Page 24

Preparation for Use

Model 2090 Multi-Device Controller

position, parameter, or speed selection in the display

window. For limits, position, and parameters, if the Model

2090 is not already in edit mode, it will automatically

switch to edit mode.

NOTE: With the exception of changing the speed selection,

this key only works when the device is not in motion.

4. POSITION

KEYS AND INDICATORS

UP/CW key – Pressing this key will command the

associated primary device to move in the UP or

CLOCKWISE direction. Actual motion will depend on the

current state of the device and the controller.

UP/CW indicator – Lights solid to indicate that the device

is moving in the UP or CLOCKWISE direction. Flashes to

acknowledge user key-press of the UP/CW key and to

indicate that the target motion is in the UP or

CLOCKWISE direction during reverse delay operations.

STOP key – Pressing this key will command the

associated primary device to stop motion. Variable speed

devices will decelerate to their minimum speed before

disabling the drive.

STOP indicator – Lights solid to indicate that the device

is stopped. Flashes to acknowledge user key-press of the

STOP key and during deceleration of variable speed

devices.

DOWN/CCW key – Pressing this key will command the

associated primary device to move in the DOWN or

COUNTERCLOCKWISE direction. Actual motion will

depend on the current state of the device and the controller.

DOWN/CCW indicator – Lights solid to indicate that the

device is moving in the DOWN or COUNTER-

Revision G– P# 399199