Elecraft K3 Owner's Manual - Manual (Page 43)

43
K3 with KAT3 and KXV3
Figure 4 shows the antenna possibilities with both the KAT3 and KXV3 installed. The main receiver can use
ANT 1, 2, or RX ANT IN. The sub receiver can either share the main receiver’s RF source, or use its AUX RF
input. The latter can be either the non-transmit KAT3 antenna or the AUX RF BNC connector, as described
earlier. In either case, the sub receiver’s antenna must be isolated from the transmitting antenna.
Main RX
Ant 1
Ant 2
KRX3
L-Network
KAT3 ATU
Sub RX
K3
K2
K1
*
SA1
SA2
SA4
* Includes C.O.R.
Aux RF
RX Ant.
KXV3
*
SA3
Figure 4. Main/Sub Receiver Routing with KXV3 and KAT3 Installed