HP 2566C - Manual (Page 8)

What Is In This
Manual
The information in this manual is divided into the following chapters:
Chapter 1:
General Information
This chapter provides a list of related documentation that may be
useful to you. This is followed by a functional description of the
HP2566C/HP2567C printer, a list of options and supplies, and a word
about service and operator safety.
Chapter 2:
Getting the Most From
Your Printer and Paper
To determine the best location for your printer and what kind of paper
to use, read Chapter 2.
Chapter 3:
Preparing the Printer for
Operation
Chapter 3 helps you begin using the printer. It explains how to load the
ribbon and paper, adjust your printer for different sizes and thicknesses
of paper, and set Top of Form.
Chapter 4:
Setting-Up the powered
paper stacker
Once your paper is loaded correctly in the printer, follow the instructions
in this chapter to set-up your powered paper stacker for optimum paper
stacking performance.
Chapter 5:
Configuring Printer
Features
This chapter explains how to program your printer to perform various
tasks. It also describes how to set the HP-IB interface address and run
sub-tests.
Chapter 6:
Using the Printer
Chapter 6 discusses the use of the Operator Control Panel and explains
each control key in detail. After this there are sections on power fail
recovery and reset. Vertical Forms Control (VFC), and optimizing print
quality.
Chapter 7:
In Case Of Difficulty
This chapter tells you what to do in case of printer fault conditions. All
printer errors are explained; even those that do not show up in the
display window.
Appendix A:
Printer Specifications
Appendix A gives detailed printer specifications, including physical
characteristics, environmental requirements, electrical hook-up, power
consumption, and performance data.
Appendix B:
Paper Specifications
Appendix C:
Ribbon Specifications
This appendix describes paper requirements and provides information on
specialty forms.
This section lists specifications for the printer ribbon.