HP 2566C - Manual (Page 119)

Power requirements, printer, 2-4, A-3
Power supplies, 1-4
Power switch, illustration, 6-3
Preventive maintenance, printer, 6-16
Primary character sets, selection, 5-3
PRINT 1 LINE key, 6-8
Printer
accessories, 1-5
adjust Forms Length, 1 inch, 3-26
adjust horizontal paper tension, 3-19
adjusting forms length, 3-25
adjusting forms position, 3-17
adjusting forms thickness, 3-21
adjusting Top of Form, 3-30
adjusting vertical paper tension, 3-15
audible noise specifications, A-8
calling for help, 7-8
certification, A-1
character set options, 1-3
CONFIG, key, 6-6
configuration function numbers, table, 5-2
configuration values retained when power
goes off, 6-11
configuring character sets, 5-3
configuring functions, 5-1
continuous self-test, 5-8
convenience options, 1-4
default configuration values when power
goes off, 6-11
depth, without powered paper stacker, A-3
depth, with powered paper stacker, A-3
disconnect modem, 5-4
display functions mode, 5-5
display modes, illustration, 6-1
display window, 6-5
dot-matrix vs. full-font, A-2
dot size, A-6
draft character set, description, 6-16
electrical requirements, A-3
ENTER key, 6-7
error codes, 7-4
errors 14 through FF, 7-6
example of continuous sub-test, 5-9
finding the fail point number, 7-8
FINE ADJ. keys, 6-8
FORM FEED key, 6-7
forms loading controls, 6-8
forms thickness adjustment lever, descrip­
tion, 6-10
graphics printing, 6-12
height, without powered paper stacker, A-3
height, with powered paper stacker, A-3
HP-IB interface selection, 5-6
humidity specifications, A-8
installation, 2-1
interface configuration, 5-5
interface subsystem options, 1-4
UNE FEED key, 6-7
loading paper, 3-10
location, 2-1
L.P.I. ADJ.key, 6-6
non-operator correctable errors, 7-6
off-line, 6-12
on-line, 6-12
ON-LINE indicator, 6-5
ON-UNE key, 6-7
ON/OFF switch, illustration, 6-3
open the tractors, 3-13
operational codes, 6-2
operation of vertical tension lever, 3-15
operator control panel, illustration, 6-4
operator controls and indicators, 6-3
operator correctable errors, 7-5
Operator Information Label, 3-10
operator safety, 1-6
optimizing print quality, 6-14
options, 1-2
ordering paper, 1-5
ordering ribbons, 1-5
overall ribbon dimensions, C-1
overview, A-1
PAGE L. ADJ. key, 6-7
paper feed problems, 7-2
paper jam problems, 7-5
paper-out condition, 7-5
paper slew rate, A-7
paper tearing problems, 7-2
parts of the printer, illustration, 6-3
perforation skip, 3-27
performance data, HP2566C, A-5
performance data, HP2567C, A-6
physical specifications, without powered
paper stacker, A-3
physical specifications with powered paper
stacker, A-3
power cable length, A-3
power consumption, A-3
power dissipation, A-4
power-f£ul recovery, 6-11
power-on problems, 7-2
power requirements, 2-4, A-3
power supply options, 1-4
preventive maintenance, 6-16
primary character set selection, 5-3
PRINT 1 LINE key, 6-8
printer will not print, 7-3
printing labels, B-5
print quality problems, 7-3
print speeds, HP2566C, A-5
print speeds, HP2567C, A-6
Index-4