HP 2566C User Manual
Page 77
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Printer re
Under most conditions, the printer is in the STATUS mode and displays
its current status in the Operator Control Panel display window. When
in the STATUS mode, none of the decimal points on the display are
illuminated but a status number is displayed. This number corresponds
to a speciric status described in Table 6-1.
Moie
When the printer is in the SET TOP OF FORM mode, printer status is
ijp still displayed, but all three decimal points are illuminated.
Table 5-!.
r
Status
Code
Description
0
Printer ready (also modem disconnected
or serial interfaces)
1
Printer ready, modem connected (serial interface)
2
Silent run-data recovery for HP-IB
interfaces on HP 3000
4
Performs a sub-test in continuous mode
(continuous test active)
5
Performs a single pass sub-test (single test active)
6
Print One Line (file data) activated
7
Print One Line (test pattern) activated
Operator Correctable Problems
10
Swing-gate open
11
Printer out of paper
12 Ribbon jam
13 Paper jam
Error numbers 14 through 91 indicate run time or self-test errors and
are explained in Chapter 7.
6-2 USING THE PRINTER