Physical specifications, Electrical, Characteristics – HP 2566C User Manual
Page 102
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For most standard paper and multi-part forms, the smaller print
gap of dot-matrix printers does not present any problems. However,
some specialty forms may cause unacceptable paper jam rates or print
smearing even though they perform satisfactorily in full font printers.
For a detailed discussion of the restrictions of specialty forms, refer to
Appendix B, “Specialty Forms Specifications.”
Physical
Specifications
Without powered paper stacker
Including powered paper
stacker
Width; 38.7 inches (98.3 cm)
Depth: 25.0 inches (63.5 cm)
Height: 43.3 inches (110 cm)
Weight: 465 pounds (211 kg)
Width: 38.7 inches (98.3 cm)
Depth: 41.5 inches (105.41 cm)
Height: 43.3 inches (110 cm)
Weight: 552 pounds (250 kg)
Electrical
Input (VAC)
Frequency (Hz)
Characteristics
100 (+5%, -10%)
50/60 ( + 10%, -5%)
120 ( + 5%, -10%)
50/60 ( + 10%, -5%)
220 (+5%, -10%)
50/60 ( + 10%, -5%)
240 (+5%, -10%)
50/60 ( + 10%, -5%)
Power Cable Length
Two metres (approximately 6.5 feet)
Power Consumption
HP2566C
HP2567C
150 W non-printing
150 W non-printing
400 W printing (typical)
450 W printing (typical)
550 W printing (maximum)
650 W printing (maximum)
PRINTER SPECIFICATIONS A-3